| | |
|
| |
| | |
|
|
Align T-Rex 700E DFC HV Super Combo |
Part: KX018E15
|
List: $1,799.99
Price: MAP Price $1440.00
On-Order
|
|
|
|
Rotor Diameter: 61.49" (1562mm)
Tail Rotor: 11.06" (281mm)
Weight: 6.39lbs. (2900g)
Channels: 7

Motor: Align 750MX (530Kv)
The T-Rex 700E DFC HV Super Combo provides proven performance with an electric drive system. You will be the envy of all at your flying field.
This is the T-Rex 700E DFC HV Super Combo from Align. Once again Align overthrows traditional RC helicopter designs with this version of the T-Rex 700E DFC HV Super Combo. Electric power transcends the capabilities of Nitro engines to take large heli performance to new levels! With more torque and power available to the T-Rex 700E DFC HV Super Combo performance is beyond amazing. Electric flight is also quieter and cleaner so there is no oily mess to cleanup at the end of your flying day! Sliding battery tray rails and a innovative battery retaining system are but two of the features that make this amazing 90 class heli stand out.
Align helicopters literally sets the new standard in both quality and price.
Special Features:
- Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed
- Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction
- Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a clean and uncluttered look
- Top mounted motor base bringing the motor's center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively
- Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight
- New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation
- Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve overall power output
- Brand new gear box with more streamlined design also allows for simpler disassembly
- High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision
- Torque Tube driven tail for incredible 90 sized performance
- Rigid frames, fins and boom supports that can handle hard crashes, usually without as much damage
Specifications:
- Length: 1345mm
- Height: 360mm
- Main blade length: 690mm
- Main rotor diameter: 1562mm
- Tail rotor: 281mm
- Motor pinion gear: 12T
- Main drive gear ratio: 1:9.33:4.37 (E:M:T)
- Autorotation tail drive gear: 104T
- Tail drive gear: 22T
Included Accessories:
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blades
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless System
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105 3K Carbon Fiber Tail Blades
All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.
T-Rex 700E DFC Setup Suggestions:
| |
3D |
Extreme 3D |
| Swash Servos (3) |
Stock |
MKS HBL950 |
| Tail Servo |
Stock |
MKS HBL980 |
| Receiver |
Jeti Duplex EX Remote Rsat |
Jeti Duplex EX Remote Rsat |
| Motor |
Stock |
Scorpion 4525-520 Ultimate |
| Flybarless Controller |
Stock |
Heli Command HC3X |
| Receiver Power |
Stock |
Rx TP2600 2S |
| Blades |
Stock |
Spin 690mm |
Suggested Equipment:
(3) MKS HBL950 servo
(1) MKS HBL980 servo
(1) Jeti Duplex EX Remote Rsat receiver
(1) Heli Command HC3-Xtreme
(1) Scorpion 4525-520 Ultimate
(1) Jeti Mezon 130
(1) TP 65C 12S 4400 Battery
(1) Spin Matt Black 700 Blades
|
| |
|
Price:
$189.00
In Stock: 25
|
|
|
Price:
$153.00
In Stock: 6
|
|
|
Price:
$159.00
In Stock: 1
|
|
|
|
Product Reviews:
|
|
|