 |
 |
 |
 |
 |
Rotor Diameter:
38" (970mm)
|
Tail Rotor:
7.9" (200mm)
|
Weight:
3.74 lbs. (1700g)
|
5-6 channels
|
Align BL500L
EVO FP2500 6S |
Align offers the most complete high-performance, high-quality helicopters in the industry. The T-REX 500 boasts a .30-size airframe, but with a performance level far beyond the equivalent size of glow helicopter. Align helicopters literally sets a new standard in both quality and price. The Trex 500 continued the quality standard which was first established with its smaller brother the T-Rex 450. The T-Rex 500 gives pilots enormous control in both precision flying as well as 3D maneuverability. The NEW Trex 500CF/GF proved to be the HOTTEST 500 size helicopter on the market and the combo delivers great products for one low price.
Align helicopters literally sets a new standard in both quality and price.
Special Features:
- Efficient brushless electric power system
- Black carbon fiber or silver fiber glass frame
- Pre-Painted fiberglass canopy
- Main and tail blade grips with thrust bearings
- Direct to swashplate CCPM linkage
- Fully driven tail auto rotation system
- Tail rotor belt drive system
- High center of gravity
- Rear tail servo mount
Specifications:
- Length: 850mm
- Height: 310mm
- Main blade length: 425mm
- Main rotor diameter: 970mm
- Tail rotor diameter: 200mm
- Motor drive gear: 12T/13T
- Main drive gear: 162T
- Autorotation tail drive gear: 145T
- Tail drive gear: 31T
- Drive gear ratio: 1:13.5:4.68/1:12.46:4.68
- Empty weight: 935g
- Flying weight: 1700g
Included Accessories:
(1) T-Rex 500 Kit
(1) Fiberglass Canopy
(1) 425mm Fiberglass or CF Blades
(1) Align RCE-BL60G ESC
(1) Align BL500L Motor
(2) Motor Pinions 12T & 13T
All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.
T-Rex 500 CF/GF Setup Suggestions:
|
|
Stock |
3D |
| Swash Servos (3) |
JR DS3421MG |
JR DS3421MG |
| Tail Servo |
HSG-5083MG |
HSG-5083MG |
| Receiver |
Spektrum AR6200 |
Spektrum AR6200 |
| Battery |
FP2500 6S |
FP2500 6S |
| Motor |
Stock |
Hacker A30 8XL |
| ESC |
Stock |
Jazz 80-6-18 |
| Gyro |
Hitec HG-5000 |
Hitec HG-5000 |
| Pinion |
12T-15T |
22T |
| Receiver Power |
Stock |
Ultimate BEC 6V |
| Blades |
Align CF 425mm |
MS CF STD 420mm |
Suggested Equipment:
(3) JR DS3421MG servo
(1) Hitec HSG-5083MG servo
(1) Hitec HG-5000 gyro
(1) EVO FP2500 6S battery
(1) Hacker A30 8XL
(1) Jazz 80-6-18
(1) Ultimate BEC 6V
(1) MS Composit 420mm
|
