 |
 |
 |
 |
 |
Rotor Diameter:
53.15" (1350mm)
|
Tail Rotor:
9.44" (240mm)
|
Weight:
7.1 lbs. (3200g)
|
5-6 channels
|
Engine: .50 Glow
|
Align offers the most complete high-performance, high-quality helicopters in the industry. The T-REX 600 boasts a .50-size airframe, but with a performance level far beyond the equivalent size of glow helicopter. Align helicopters literally sets a new standard in both quality and price. The Trex 600 continued the quality standard which was first established with its smaller brother, the T-Rex 450. The T-Rex 600 gives pilots enormous control in both precision flying as well as 3D maneuverability. The NEW Trex 600 Nitro Pro has proven to be the HOTTEST 600 size helicopter on the market and with our recommended set up, it delivers great products for a low price.
Align helicopters literally sets the new standard in both quality and price.
Special Features:
- Beautiful factory painted fiberglass canopy w/rigid clip for fast removal (Pro)
- +/-14 degrees collective pitch is possible for extreme 3D performance
- Clutch, Fan and Bell assembly provide very smooth operation, even at high RPM
- Forward mounted tail servo helps balance and helps to keep exhaust oil from entering the servo
- All servos moved forward for CG
- Battery tray designed for easy, clean radio gear installation
- Fuel Tank Capacity 440cc for about 8-10 minutes 3D flying
- Main Gear Ratio 8.5:1, 1500-2200 Rotor RPM
- Heavy duty tail with thrust bearings and 95mm Tail Blades
- Torque Tube driven tail for incredible 50 sized performance (Pro)
- Rigid frames, fins and boom supports that can handle hard crashes, usually without as much damage
- Super engine cooling system features large diameter fan and very efficient airflow
- Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any problems
Specifications:
- Length: 1160mm
- Height: 410mm
- Main blade length: 600mm
- Main rotor diameter: 1350mm
- Tail rotor: 240mm
- Engine pinion gear: 20T
- Main drive gear ratio: 8.1:1:4.5 (E:M:T)
- Autorotation tail drive gear: 180T
- Tail drive gear: 40T
- Flying weight: 3200g
Included Accessories:
(1) T-Rex 600 Nitro Kit (CF Frame/Pro, FG Frame/Standard)
(1) Painted Fiberglass Canopy (Pro)
(1) Plastic Canopy (Standard)
(1) Fuel Tube w/Fuel Filter
(1) Torque Tube Tail Drive (Pro)
(1) Belt Driven Tail Drive (Standard)
All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.
T-Rex 600 Nitro Pro Setup Suggestions:
|
Stock |
3D |
| Swash Servos (3) |
Futaba S9452 |
JR DS8717 |
| Tail Servo |
Futaba S9254 |
Futaba S9256 |
| Receiver |
Spektrum AR7000 |
Spektrum AR7000 |
| Engine |
O.S. Hyper .50 |
O.S. Hyper .50 |
| Gyro |
Futaba GY401 |
Spartan DS760 |
| Receiver Power |
Stock |
Spektrum/1600 2S |
| Blades |
Align CF 600mm |
V-Blade 600mm |
T-Rex 600 Nitro Pro Flybarless Setup Suggestions:
|
Stock |
3D |
| Swash Servos (3) |
Futaba S9452 |
JR DS8717 |
| Tail Servo |
Futaba S9254 |
Futaba S9256 |
| Receiver |
Spektrum AR7000 |
Spektrum AR7000 |
| Engine |
O.S. Hyper .50 |
O.S. Hyper .50 |
| Gyro |
V-Bar |
V-Bar |
| Receiver Power |
Stock |
Spektrum/1600 2S |
| Blades |
Align CF 600mm |
V-Blade 600mm |
Video:
 T-Rex 600 Nitro - 70.8MB
Flash Video:
Suggested Equipment:
(3) JR DS8717 servo
(1) Futaba S9256 servo
(1) Spartan DS760 gyro
(1) O.S. Hyper .50 SX-H engine
(1) Hitec HS-82MG servo (throttle)
(1) 18G Servo adapter plate (HN6070)
(1) 50 High Performance Muffler
(1) RCE-G600 Governor
(1) Spectrum voltage regulator
(1) RotorTech 600/V-Blades 600 TST
Suggested Equipment (Flybarless):
(3) JR DS8717 servo
(1) Futaba S9256 servo
(1) Virtual flybar system (MIK4010)
(1) T-Rex 600 conversion head (MIK4149)
(1) O.S. Hyper .50 SX-H engine
(1) Hitec HS-82MG servo (throttle)
(1) 18G Servo adapter plate (HN6070)
(1) 50 High Performance Muffler
(1) RCE-G600 Governor
(1) Spectrum voltage regulator
(1) EVO Rx FP1600 2S battery
(1) RotorTech 600/V-Blades 600 TST
|
