Connecting balancing board EAC129 for Thunder Power and FlightPower batteries INCLUDED!!!!

Bantam E-Station BC6-DC Max Power Output 80W Input Voltage 11-18V DC Battery Type NiCD, NiMH, Li-poly, Lead, A123 Min/Max Lipo Cells 1-6 Cells Min/Max NiMH Cells 1-15 Cells Min/Max NiCD Cells 1-15 Cells Min/Max Pb Cells 2-20V Charge Current 0.1-5A Discharge Current 0.1-1A (8W) Displayed Information Voltage, Current, Time Dimensions 130mm x 90mm x 30mm Weight 340g Cooling System Built-in Fan Interface USB Programming Cable Upgradeable Via USB PC Cable Special Features Built in Li-poly Balancer Manual Bantam BC6-DC (.pdf)

Individual voltage balancer for Lithium batteries inside
BC6-10 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.




When the "Balance charge" mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger's charging lead should be connected to the output of battery pack. And also, please pay attention to the polarity of the battery pack's output which goes to the charger's output. If it is reversed, the short-circuit can be happened on the battery pack.