 |
 |
 |
 |
 |
Rotor Diameter:
54" (1370mm)
|
Tail Rotor:
10.25" (260mm)
|
Weight:
7.25 lbs. (3300g)
|
5-6 channels
|
Engine: .50 Glow |
Compass Knight 50 3D Nitro is designed for 3D stunt flying, yet it is forgiving enough for a beginner or intermediate pilot. It features a compact and lightweight metal airframe with fully metal rotor head. Compass Knight 50 3D Nitro is simply one of the most versatile machines available. It features very good stability, solid flight characteristics for the newcomer, but it also has a long list of features even expert pilots will appreciate that allow this machine to perform the most complex aerobatics. Modular construction and careful engineering make the Knight perfect for active 3D fliers. The engine drops out in a couple of minutes as well as tank and tail rotor systems.
Several unique design features make this Helicopter a top 3D performer.
Special Features:
- Rigid G10 Frame Set
- Metal swashplate and headblock
- Dual pin tail rotor pitch mechanism
- Belt drive (quick and easy to repair)
- Driven tail for tail control during autos
- Fully ball bearing supported controls
- Thrust bearings in both main and tail rotor heads
- Responsive CCPM controls
- Very quick to build, no need for much disassembly,
- Metal Washout Base and See-saw
- 3D ready out of the box, fully capable
- Lightweight 50 class helicopter
- Inexpensive replacement parts
- Modular design
- Accepts standard size servos
Specifications:
- Length: 1270mm
- Height: 426mm
- Main blade length: 600-620mm
- Main rotor diameter: 1370mm
- Tail rotor: 260mm
- Engine pinion gear: 10T
- Main drive gear ratio: 8.7:1:4.8 (E:M:T)
- Autorotation tail drive gear: 62T
- Tail drive gear: 87T
- Flying weight: 3300g
Included Accessories:
(1) Compass Knight 50 3D Kit
(1) White Plastic Canopy
More information (links):
* Building Instructions
* Parts List
All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.
Knight 3D Nitro Setup Suggestions:
|
Stock |
3D |
| Swash Servos (3) |
Futaba S9452 |
JR DS8717 |
| Tail Servo |
Futaba S9254 |
JR DS8900G |
| Receiver |
Spektrum AR7100R |
Spektrum AR7100R |
| Engine |
O.S. Hyper .50 |
YS 50ST Heli |
| Gyro |
Futaba GY401 |
Spartan DS760 |
| Receiver Power |
Rx FP1600 2S |
Rx FP1600 2S |
| Blades |
RotorTech 610mm |
RotorTech 610mm |
Knight 3D Nitro Flybarless Setup Suggestions:
|
Stock |
3D |
| Swash Servos (3) |
JR DS8717 |
JR DS8717 |
| Tail Servo |
JR DS8900G |
JR DS8900G |
| Receiver |
Spektrum AR7100R |
Spektrum AR7100R |
| Engine |
O.S. Hyper .50 |
YS 50ST Heli |
| Gyro |
V-Bar |
V-Bar |
| Receiver Power |
Spektrum/1600 2S |
Spektrum/1600 2S |
| Blades |
Gohbee 600mm |
Gohbee 600mm |
Video:
 Knight 600E - 30MB
Flash Video:
Suggested Equipment:
(3) JR DS8717 servo
(1) JR DS8900G servo
(1) AR7100R receiver
(1) Spartan DS760 gyro
(1) YS 50ST engine
(1) Hitec HS-65MG servo (throttle)
(1) G-Force micro servo adapter
(1) Hatori Pipe OS/YS50 3D
(1) EVO Rx FP1600 2S battery
(1) RotorTech 600mm
Suggested Equipment (Flybarless):
(3) JR DS8717 servo
(1) JR DS8900G servo
(1) AR7100R receiver
(1) Virtual flybar system (MIK4010)
(1) Compass conversion head (C4149)
(1) YS 50ST engine
(1) Hitec HS-65MG servo (throttle)
(1) G-Force micro servo adapter
(1) Hatori Pipe OS/YS50 3D
(1) EVO Rx FP1600 2S battery
(1) Gohbee 600mm
|
