Wingspan: 62" (1570mm)
Length: 62.5" (1580mm)
Weight: 9.5-10.5 lbs. (4315-4770g)
Channels: 4,7
Good: (2) E-Flite Power 32, 12x10
Better: (2) E-Flite Power 46, 13x10
(2) EM3700 4S
(2) 63mm/2 1/2" spinner
The Deuces Wild 60e ARF is part of E-flite's PLATINUM SERIES. The platinum series delivers superior, enhanced features and meticulous attention to detail. The lightweight, sturdy airframe is constructed of balsa and plywood and covered with genuine UltraCote. The bolt-on tail assembly and three piece, plug-in wing are all removable to allow easy transportation. With the Deuces Wild, you have options. You can use the included fixed landing gear or install the optional Robart retracts with pneumatic up, spring down operation. The model is complete with pre-bent wire struts for ease landing gear installation. In addition, there is an optional cockpit kit that adds another level of detail complete with dashboard instrumentation, seat, and pilot. The wing design utilizes two Selig airfoils to give this aircraft excellent performance at high and low speeds, while also exhibiting gentle stall characteristics. Retract and flap ready options enable the pilot to push the envelope with a sport ARF twin electric to the like that has never been done before. The Deuces Wild is a sport plane capable of aerobatic maneuvers and is designed to be easier-to-fly than other similar size twin engine models. This model was designed even with the unthinkable in mind-the loss of an engine. In the event of an engine loss, this aircraft is still easily flyable. Any experienced modeler will appreciate the flight characteristics, aerobatic capabilities, and details of the Deuces Wild Platinum Series.
This plane showcases the power, level of detail, quality of construction never seen before.
Special Features:
- Control surfaces: Ailerons, Elevator, Rudder and Flaps
- Step-by-Step instruction manual
- Balsa/Plywood construction
- Removable battery hatches
- Fixed landing gear included
- Plug-in, bold-on wing design
- Bolt-on tail surfaces
- Ready for optional Robart retract
- Complete hardware package
- Custom decal sheet
More information (links):
* Building Instructions
Airfoil
Wing area
Wing loading
Empty weight
: Selig mod.
: 740 sq.in.
: 29-30 oz/sq.ft.
: 6 lbs. (2725g)
Suggested Equipment:
(2) E-Flite Power 32
(2) CC Phoenix ICE 50SB ESC
(2) EM3700 4S battery
(6) HS-5485HB servo
(1) HS-81 servo (w/retract)
(2) TY 2 1/2" Black spinner
(2) APC-E 12x10 propeller
(2) Deans connector
(2) 12" Servo extension
(2) 6" Servo extension
(3) 3" Servo extension (4 w/retract)
(3) Servo Y-harness
Retract Installation:
(1) Robart Retract Deuces Wild 60e
(1) Robart Air line quick disconnects