Wingspan: 78" (1980mm)	Length: 74.5" (1890mm)	Weight: 13-15 lbs. (5900-6810g)	4,5 channels	Good: AXI 5330/18, 20x10 Better: Hacker A60 16L, 24x12 Engine: 1.6-2.4 EVO FP3700 10S 89mm/3 1/2" spinner (Included)

A popular competitor on the Unlimited Class circuit and at international air races, the Edge 540 is a world-class aircraft known for exceptional aerobatics and precision maneuvers. In this model manufacturer has captured every detail of this spirited performer in a stunning replica that is a worthy addition to the Performance Series of high-quality R/C models that combine easy assembly with realistic flight! Outstanding manufacturing, parts fit and prefabrication allow the Edge 540 to be flight ready in about 20-25 hours. The rudder and each elevator half utilize independent servos for consistent yaw and pitch control. Servos can be mounted in the fuselage for a lightweight pull-pull setup, or in the tail for a shorter, more direct linkage. Each aileron is controlled by an individual servo. Short, direct linkages make roll control precise, positive, dependable and easy to set up. Large control surfaces and full deflection throws enable the Edge 540 to react quickly to 3D control inputs. Knife edge, high alpha, inverted, upright... these and any other extreme maneuvers you can think of are at your command with this exciting aerobat! The beautifully molded fiberglass cowl and wheel pants are expertly painted to match the trim scheme. From every angle this model is a stunner! Distinctively different factory applied trim schemes on the top and bottom make easy to follow the model orientation during maneuvers. The composite landing gear offers smooth contours that perfectly complement the scale looks, and provides the strength and reliability needed for confident touchdowns.

Edge 540 is another fine example of a Performance Series sport/precision/3D airplane that flies great and is easy to assemble. It's also one of today's most recognized aerobatic planes.

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Fully illustrated, step-by-step instruction manual
- Complete hardware package
- Lightweight balsa/ply construction
- Pre-painted fiberglass cowl and wheel pants
- Removable one piece wing
- Tail surfaces with airfoils
- Covered in authentic MonoKote
- High contrast color scheme

More information (links):
* Building Instructions

Airfoil	:	Symmetrical
Wing area	:	1088 sq.in.
Wing loading	:	28-32 oz/sq.ft.
Empty weight	:	9 lbs. (4085g)

Suggested Equipment:
(1) O.S.Max 1.6 FX engine
(1) Slimline Pitts Style 160 muffler
(1) APC 18x8 propeller
(1) Hacker A60 16L
(1) Aluminum mount A60
(1) Spin 99 Opto ESC
(1) EVO FP3700 10S battery
(1) Duralite 6V (Rx voltage regulator)
(1) EVO Rx FP2170 2S battery
(6) HS-6965HB servo
(1) HS-425BB servo (w/engine)
(1) TT-0814 prop nut (Hacker A60 16L)
(1) APC-E 24x12 propeller
(1) Deans connector
(2) 36" Servo extension
(2) 24" Servo extension
(1) Servo Y-harness
(4) SWB Aluminum Servo Half Arm 1.5"
(2) SWB Aluminum Servo Offset Arm 4" (Rudder)
(1) 1/4 Yellow pilot sport