Wingspan: 30.75" (780mm)	Length: 48.5" (1230mm)	Weight: 35-37 oz. (990-1050g)	4,6 channels	Good: FAM EDF70 (Included) Better: WM 480/Neu 1112/1Y EM2600 4S

The Lockheed Martin F-16 Fighting Falcon is a multirole jet fighter aircraft originally developed by General Dynamics for the United States Air Force. Designed as a lightweight fighter, it evolved into a successful multirole aircraft. Pre-painted fuselage, wings, and tail surfaces are pre-molded and fully finished. This closed-cell foam delivers the benefits of costly composite construction at a fraction of the cost. It delivers the structural strength and rigidity of traditional structures without building, and also offers a smooth, paintable surface. Glue the wings and tail onto the fuselage and install the control horns and pushrods to the pre-installed servos. Easily removable battery hatch is held in place with magnets. Access to the fan unit and ESC is also very simple, just remove two screws and the entire middle section of the main duct can be removed. The steerable/removable nose gear and main gear are already pre-installed. The airplane includes 5 servos, 70mm ducted fan unit with outrunner brushless motor, 40A ESC, 14.8V 2100mAh Li-poly battery pack, landing gear and assorted hardware. Model can be flown either off a runway with the included landing gear or it is easily hand launched. Difficult to stall, the jet will slow to a crawl and still maintain full control. Great to land, the approach is easy to control and smooth landings are easy. Assembly takes only one hour.

The F-16 is the largest Western fighter program with over 4,400 aircraft built since production started in 1976 and serves in the air forces of 25 nations.

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Sold in 2 version: ARF, Airframe w/Fan Only
- Step-by-Step instruction manual
- Fully pre-painted molded foam
- Removable landing gear w/steerable nose gear
- 70mm ducted fan unit w/brushless motor installed
- 40A ESC, Li-poly 2100mAh 4S battery, 5 servos included
- Glue-on, molded foam wings
- Complete hardware package
- Custom decal sheet

Airfoil	:	VESS
Wing area	:	180 sq.in.
Wing loading	:	28-29 oz/sq.ft.

Video:
F-16 Fighting Falcon EDF70 - 6.2MB
F-16 EDF70 Detailed Video - 13.2MB

Flash Video:

Power Package Upgrade:
(1) EDF WeMotec Mini PRO 480 Fan
(1) Neu 1112/1Y
(1) CC Phoenix ICE 75SB ESC
(1) EM2600 4S battery
(1) Deans connector