Wingspan: 41.75" (1060mm)	Length: 38.75" (985mm)	Weight: 13-14 oz. (370-400g)	4,5 channels	Good: AXI 2212/26, 9x3.8 Better: Hacker A20 30M, 10x3.8 TP1350 3S

The Genie is designed to be a fully F3A/3D capable indoor or outdoor parkflyer. This model is extremely light and fully 3D capable with revolutionary details like hollow molded foam structure, pre-painted surfaces and fully pre-hinged control surfaces. Due to the specially designed airfoil the Genie has a surprisingly wide speed range. This plane is a blast to fly, even in light wind. But where it really shines is at the end of the day, with little or no wind, you can hover, harrier, or do any type of aerobatics while keeping the aircraft in close. The large side area makes easy work of slow speed knife edge and even knife edge loops! The plane comes with a full hardware package and an illustrated instruction manual.

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- All foam, fully molded construction
- Completely pre-painted and pre-hinged
- Molded hatch for easy radio and battery access
- Fully illustrated instructions
- Fast Building, you will flight ready in just a few hours

Airfoil	:	Symmetrical
Wing area	:	490 sq.in.
Wing loading	:	4-5 oz/sq.ft.
Empty weight	:	4 oz. (110g)

Video:
Genie - 7.5MB

Flash Video:

Suggested Equipment:
(1) Hacker A20 30M
(1) Hacker X-12 Pro ESC
(1) TP1350 3S battery
(4) HS-45HB servo
(1) APC-Slow 10x3.8 propeller
(1) Deans connector
(2) 12" Servo extension