ESC Hacker X-30 Pro Manufacturer Hacker Applications Airplane, Sailplane Special Features X-Pro Link Programming Cont/Max Amp 30/36A Cells NiMH/NiCD 5-10 cells Cells Li-poly 2-3 cells Voltage 5-13V Programming Fully Programmable Type/Max BEC (A) Linear /1.5A Max #Servos/V 2-4/5V Dimensions 51mm x 24mm x 10mm Weight 24g

The new economical line of Hacker X-Pro brushless sensorless speed controllers is an excellent choice for high powered airplane, sailplane or helicopter applications. You can use them with virtually any brushless outrunner or inrunner motor.

All Hacker X-Pro ESCs have the same programmable features. The whole line can be set up for helicopter applications, including those with collective pitch. Additionally, for competition flyers the Hacker X-Pro line features an adjustable switching and timing rate for optimum efficiency.

All Hacker X-Pro speed controls feature:
- Linear or Switching Battery Eliminator Circuit (BEC)
- Safe "Power On"
- Low torque Soft Start, protects gear boxes and belt drives from shock
- Simple setup, no complicated switches or wiring
- Tough surface mount construction
- Smooth reverse exponential throttle
- Audible Arming Signal
- Self-calibrating endpoints
- Auto Motor cut-off with reset
- Auto shut-down when signal is lost
- Microprocessor Controlled

With the Programming X-Pro Link you can program or select the following:
1. Battery Type
2. Motor Cutoff Voltage
3. Hard or Soft Cutoff
4. Prop Brake On or Off
5. Acceleration: Low, Medium, High
6. Timing: Automatic, Low for 2-pole, High for Outrunners
7. Switching Frequency, 8/16KHz
6. Rotation
8. Active RPM control (Governor Mode)