Wingspan: 42.5" (1080mm)	Length: 37.5" (950mm)	Weight: 25-26 oz. (710-740g)	4,5 channels	Good: Hacker A20 22L, 10x7 Better: Hacker A30 28S, 10x7 TP2100 3S 45mm/1 3/4" spinner

The E-flite Mini Pulse XT is another great aircraft in E-flite's family of electric RC aircraft. The Mini Pulse XT sport design is based on popular retro style Pulse 40XT. This model is not only gorgeous but it is loads of fun as well. All of the time consuming building and covering has been already done. You can be flying in just a few hours. With its low wing and generous dihedral, the Mini Pulse XT is a parkflyer that gives you the best of both worlds. It's very responsive and also very forgiving at the same time. Once you have mastered a trainer airplane, the Mini Pulse XT is a great next step.

With our recommended power systems you are sure to be impressed.

Special Features:
- Control Surfaces: Ailerons, Elevator and Rudder
- 95% pre-built, get flying in 3 hours or less
- Laser cut balsa and plywood construction
- Tight UltraCote covering with all seams hand-sealed
- Factory installed hinges and control horns
- Steerable tail wheel
- Pre-painted aluminum landing gear
- Pre-painted fiberglass wheel pants, and cowl
- Bolt-on wing and tail
- Easy access magnetic battery hatch

More information (links):
* Building Instructions

Airfoil	:	Clark-Y
Wing area	:	330 sq.in.
Wing loading	:	11 oz/sq.ft.
Empty weight	:	15 oz. (430g)

Suggested Equipment:
(1) Hacker A30 28S
(1) Hacker X-30 Pro ESC
(1) TP2100 3S battery
(4) HS-55 servo
(1) TY 1 3/4" White spinner
(1) APC-Slow 10x7 propeller
(1) Deans connector
(2) 12" Servo extension
(2) 6" Servo extension
(1) Servo Y-harness