 |
 |
 |
 |
 |
Wingspan:
39.5" (1005mm)
|
Length:
33.5" (845mm)
|
Weight:
24-26 oz. (680-740g)
|
3,4 channels
|
Good:
AXI 2212/26, 8x6
Better:
Hacker A20 20L, 8x6
TP1800 3S
30mm spinner
|
Finally seven-tenths of the world's surface becomes your runway. Your Mini Seawind may never see the ocean, but it
is right at home in any nearby water R/C flying site. With its compact size and quick assembly, the Mini Seawind can go from the box to the pond in less time than it takes to charge your transmitter batteries! On-board electronics install easily into ready-made mounts using glue or screws. The removable hatch cover is held securely in place with powerful magnets. Motor to speed controller wiring is already provided. Clear, vacuum-formed canopy with painted frame and lightweight profile pilot figures adds more realism to your model. To complete assembly of the one-piece wing, simply glue on the tip floats and install your aileron servo and linkages. Do not forget to use included, handy cradle to support your model during assembly and pond-side battery pack changes. The model's water rudder can be removed for hand launches and grass landings. The Receiver Ready (RxR) version comes with (3) already installed ES50 Micro Servos, ElectriFly SS-25 Speed Controller and RimFire 28-30-950 Brushless Outrunner motor.
The Seawind flies well even in winds up to 10 mph (16 km/h). It is capable of all sport aerobatics, such as loops, rolls, stall turns, and inverted flight. Receiver Ready (RxR) version comes with a quality ElectriFly brushless power system and three ES50 micro servos — just add a receiver and battery pack.
Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Sold in 2 version: ARF, RxR
- Receiver Ready (RxR): Motor, ESC, Servos Included
- Step-by-Step instruction manual
- Unique, lightweight foam construction
- Pre-painted cowl and canopy
- One-piece, bolt-on wing
- Large removable top hatch
- Complete hardware package
- Custom decal sheet
More information (links):
* Building Instructions (ARF)
* Building Instructions (RxR)
| Airfoil |
: |
Semi-symmetrical |
| Wing area |
: |
235 sq.in. |
| Wing loading |
: |
15 oz/sq.ft. |
| Empty weight |
: |
16 oz. (450g) |
Video:
 Mini Seawind Amphibian - 12.4MB
Flash Video:
Suggested Equipment:
(1) Hacker A20 20L
(1) Hacker X-20 Pro ESC
(1) TP1800 3S battery
(3) HS-56HB servo
(1) MPJ 30/3mm spinner
(1) APC-Slow 8x6 propeller
(1) Deans connector
(1) 3" Servo extension
Suggested Equipment (RxR):
(1) TP1800 3S battery
(1) MPJ 30/3mm spinner
(1) Deans connector
|
