BEC On-Board Glow Driver Manufacturer Perfect Regulators Type Switching Glow Driver Max Input Voltage 7V Min Input Voltage 4.8V Output Voltage 1.5V Glow Plug Output Current 5A Dimensions 38mm x 23mm x 9mm Weight 25g Connector Universal JR/Hitec/Futaba Applications Glow Airplanes/Helicopters

Have you wanted to have an On-Board Glow Driver that does not require ANY Radio Adjustments?
How about one that you just plug in and go fly?

We have done just that... Introducing our new Push Button Glow Driver. Simply plug it in and mount it and your ready to go, it's that simple. Works directly from your Rx to get its power, so you can plug it in to its own channel or Y-harness it in to any channel. With a working input voltage of 4.8-7V, this unit will work on just about every Helicopter/Airplane setup out there.

The remotely mounted push button has to be pressed in order for the Glow Driver to start working. Once pressed, you will get 10 seconds of glow time and then automatically shut itself off. With an 8" (200mm) Lead for the Rx and 8" (200mm) 18 gauge Silicone Wire with a Ring Terminal for Ground and Alligator Clip for your Glow Plug, you can mount this unit just about anywhere and with a 12" (305mm) long lead on the Push Button itself, there is no need to reach under the Canopy to start your Heli.

On-Board Glow-Driver will work with all of our Voltage Regulators.