Wingspan: 126" (3200mm)	Length: 60.5" (1540mm)	Weight: 61 oz. (1740g)	3 channels	Good: Mega 22/30/4, 15x10 folding Better: Hacker B50 9S 6.7:1, 18x10 folding TP3300 3S 42mm spinner

The Pulsar 3.2E REF is the latest and largest addition to the ever-growing Pulsar family of hand-made electric sailplanes. Built at our request, this model is a larger evolution of the mid sized 2.5m Pulsar. The Pulsar 3.2 models use the AG25 airfoil designed by Dr. Mark Drela specifically for 3m and larger thermal duration planes. Just like its smaller cousins, the entire model is constructed using free-flight techniques. The wing is a balsa built-up Carbon Fiber and Kevlar D-box design that utilizes carbon fiber faced balsa ribs and carbon fiber trailing edge. The open section of the wing, as well as the tail parts, are covered with transparent UltraCote. The fuselage is made of white gel-coated carbon fiber with carbon fiber tapered boom and removable fiberglass/CF nose cone. The three piece wing and 2-piece conventional tail are each easily removable for transport and storage. The rudder servo installs in the vertical stab as well as the elevator servo in the end of the carbon fiber boom. The careful use of composites, combined with an underlying wood structure in the wing, ensures a good light structure that will hold its shape for a long time. This is an extremely light, high performance model. Currently available in tree versions: ailerons, elevator, rudder and flap, simply rudder, elevator and flap or rudder, elevator and spoiler.

Virtually perfect, very well made and extremely clean.

Special Features:
- Control Surfaces: Rudder, Elevator and Flap
- Tight covering, with all seams hand-sealed
- Elegant gel-coated white fiberglass/CF fuselage with CF tapered boom
- Highly efficient pylon mounted wing
- Ready-built Balsa/CF/Kevlar D-tube 3-piece PLUG-IN wing design
- Transparent Ultracote covered wings and tail parts
- Includes all necessary hardware
- Virtually perfect, extremely clean and well made

More Information (links):
* Motor and Servo installation
* D-Box technology

Airfoil	:	AG 25
Wing area	:	1080 sq.in.
Wing loading	:	8 oz/sq.ft.
Empty weight	:	26 oz. (750g)

Video:
Pulsar 3.2E - 29MB

Flash Video:

Suggested Equipment:
(1) Hacker B50 9S 6.7:1
(1) Spin 66 ESC
(1) TP3300 3S battery
(1) HS-125MG servo
(1) Servo Frame 125
(1) HS-65HB servo (Rudder)
(1) HS-45HB servo (Elevator)
(1) Graupner 42/6/8mm folding spinner
(1) Graupner 18x10 folding propeller
(1) Deans connector
(2) 48" Servo extension
(1) 6" Servo extension