Wingspan: 59" (1500mm)	Length: 48" (1220mm)	Weight: 6-7 lbs. (2720-3170g)	4,5 channels	Good: AXI 4120/18, 13x10 Better: Hacker A50 12S, 13x10 Engine: .46-.75 TP5000 5S 82mm/3 1/4" spinner

The Revolver's contemporary styling makes it a real standout on the flight line. Once it's airborne, it really takes center stage and that's regardless of whether it's equipped with a glow engine or brushless motor. Only about 10 hours of final assembly are required before your Revolver is flight-ready. Not only does the clear canopy come installed, it also has a great-looking painted frame, and realistic-looking pilot figure. The bolt pattern on the firewall lines up exactly for either glow engine mount or a motor mount for installing a brushless outrunner motor. Select balsa and lite-ply are used for the fuselage and tail section, the 2-piece, plug-in wing features foam core balsa-sheeted design. Airfoil-shaped tail surfaces allow the plane to lock in and track solidly. The fiberglass cowl, wheel pants, and landing gear are painted in high gloss colors to match the trim scheme. On-board radio gear is quickly accessed through this hatch. It also makes it easy to change Li-polymer battery packs when equipped with recommended brushless power system.

Get ready to fire off one crowd-pleasing maneuver after another with the Revolver — it's the "sport car" of sport aerobatic airplanes.

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Step-by-Step instruction manual
- Pre-painted fiberglass cowl and wheel pants
- Tail surfaces with airfoils
- Removable canopy/hatch
- Fiberglass pre-painted landing gear
- Aluminum wing tube
- Two piece plug-in wing design
- Complete hardware package
- Custom decal sheet

More information (links):
* Servo and Motor installation
* Building Instructions

Airfoil	:	Symmetrical
Wing area	:	563 sq.in.
Wing loading	:	26 oz/sq.ft.
Empty weight	:	68 oz. (1925g)

Video:
Revolver 46 - 20.3MB

Flash Video:

Suggested Equipment:
(1) Saito FA-56 AAC engine
(1) APC 12x7 propeller
(1) Hacker A50 12S
(4) 1.5" Extension rod
(8) Mounting Screws 6-32 x 1/2"
(1) Jeti Spin 66 ESC
(1) TP5000 5S battery
(4) HS-425BB (5 w/engine)
(1) TY 3 1/4" White spinner
(1) APC-E 13x10 propeller
(1) Deans connector
(2) 6" Servo extension
(1) Servo Y-harness