Wingspan: 31.75" (806mm)	Length: 39" (995mm)	Weight: 27 oz. (765g)	4,5 channels	Good: AXI 2808/24, 10x4.7 Better: Hacker A30 16M, 11x5.5 Engine: .15 TP2100 3S 40mm/1 1/2" spinner

Designed and produced by Fliton, the Rogue 3D Bipe is in a class of its own. This plane is a real show stopper and even flies better than it looks. The Roque uses an all laser cut wood construction and is perfectly covered in UltraCote.
The ARF even includes a pre-painted fiberglass cowl and wheel pants. The Rogue 3D Bipe is both light and strong. Even the most advanced 3D pilot will be impressed with its precision. The instructions are clear and easy to follow.
This ARF includes the motor mounts for glow engines, inrunner or outrunner electric motors. You should have the assembly finished and your radio equipment installed in just a few hours. The Rogue 3D Bipe will perform beautifully either indoors or out.

This plane is a real show stopper and even flies better than it looks.

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Light and strong all-wood construction
- Perfectly covered in Ultracote
- Fully illustrated instructions
- Removable wing for easy transport
- Multiple motor mounts for your choice of power
- Strong composite landing gear
- Gel-coated fiberglass wheel pants

More Information (links):
* Installation

Airfoil	:	Symmetrical
Wing area	:	410 sq.in.
Wing loading	:	9.5 oz/sq.ft.
Empty weight	:	13.5 oz. (470g)

Video:
Rogue 3D - 6.7MB

Flash Video:

Suggested Equipment:
(1) Hacker A30 16M
(1) Hacker X-30 Pro ESC
(1) TP2100 3S battery
(4) HS-65HB servo
(1) TY 1 1/2" Blue transparent spinner
(1) APC-E 11x5.5 propeller
(1) Deans connector
(2) 12" Servo extension
(2) 3" Servo extension
(1) Deans micro antenna (1 piece)