 |
 |
 |
 |
 |
Rotor Diameter:
61.42" (1560mm)
|
Tail Rotor:
11" (280mm)
|
Weight:
9.25 lbs. (4200g)
|
5-6 channels
|
Engine: .91 Glow
|
Align offers the most complete high-performance, high-quality helicopters in the industry. The T-REX 700 boasts a .90-size airframe, but with a performance level far beyond the equivalent size of glow helicopter. Align helicopters literally sets a new standard in both quality and price. The Trex 700 continued the quality standard which was first established with its smallest brother, the T-Rex 450. The T-Rex 700 gives pilots enormous control in both precision flying as well as 3D maneuverability. The NEW Trex 700 Nitro Pro has proven to be the HOTTEST 700 size helicopter on the market and with our recommended set up, it delivers great products for a low price.
Align helicopters literally sets the new standard in both quality and price.
Electric Conversion
* (Chief Heli Bum) Danny Melnik's T-Rex Align T-Rex 700 Electric!!!
* Click Here for T-Rex 700 Electro Pro Conversion Kit
Special Features:
- Simple and light weight design provides awesome flight performance
- +/-13 degrees collective pitch is possible for extreme 3D performance
- Clutch, Fan and Bell assembly provide very smooth operation, even at high RPM
- Forward mounted tail servo helps balance and helps to keep exhaust oil from entering the servo
- All servos moved forward for CG
- Battery tray designed for easy, clean radio gear installation
- Fuel Tank Capacity 630cc for about 8-10 minutes 3D flying
- Main Gear Ratio 8.2:1, 1500-2200 Rotor RPM
- Heavy duty tail with thrust bearings
- Torque Tube driven tail for incredible 90 sized performance
- Rigid frames, fins and boom supports that can handle hard crashes, usually without as much damage
- Super engine cooling system features large diameter fan and very efficient airflow
- New main gear with one-way bearing design for high torque
Specifications:
- Length: 1335mm
- Height: 450mm
- Main blade length: 690-710mm
- Main rotor diameter: 1560-1600mm
- Tail rotor: 280mm
- Engine pinion gear: 20T
- Main drive gear ratio: 8.2:1:4.54 (E:M:T)
- Autorotation tail drive gear: 150T
- Tail drive gear: 33T
- Flying weight: 4200g
Included Accessories:
(1) T-Rex 700 Nitro Kit
(1) Painted Fiberglass Canopy
(1) CF Paddle Set
(1) CF Tail Blades Set
(1) RCE-G600 Governor
(1) Fuel Tube w/Fuel Filter
(1) Frame Brace
(1) Switch Mount
(1) Mixture Servo Mount
(1) Repair Towel
More information (links):
* Building Instructions
All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.
T-Rex 700 Nitro Pro Setup Suggestions:
|
Stock |
3D |
| Swash Servos (3) |
Futaba S9452 |
JR DS8717 |
| Tail Servo |
Futaba S9254 |
JR DS8900G |
| Receiver |
Spektrum AR7000 |
Spektrum AR7100R |
| Engine |
O.S. Hyper .91 |
YS 91SR Heli |
| Gyro |
Futaba GY401 |
Spartan DS760 |
| Receiver Power |
Rx FP3000 2S |
Rx FP3000 2S |
| Blades |
Radix 690mm |
Radix SB710mm |
Suggested Equipment:
(3) JR DS8717 servo
(1) JR DS8900G servo
(1) AR7100R receiver
(1) Spartan DS760 gyro
(1) YS 91SR engine
(1) Hitec HS-65MG servo (throttle)
(1) G-Force micro servo adapter
(1) Hatori YS91SR Pipe
(1) EVO Rx FP3000 2S battery
(1) Radix SB710mm
|
