Wingspan: 50" (1270mm)	Length: 41.5" (1055mm)	Weight: 3-3.5 lbs. (1360-1590g)	4,5 channels	Good: AXI 2826/10, 12x6 Better: Hacker A30 10XL, 12x6 TP2600 4S 50mm/2" spinner

For many years the Ultra Stick airplanes have been on many modelers' wish lists, and for good reason. Time and time again we hear that, "Nothing flies like a stick". Whether you are looking for the next step up from your trainer or if you just want a predictable aerobatic Sunday flier, the Ultra Stick 25e is always an excellent choice. The airframe is fully built and covered, the steerable tail wheel is factory-installed and the control surfaces are pre-hinged. This means less assembly time and more flying time. The Ultra Stick 25e is also set up to accept two different brushless applications, giving consumers more options to fit into their personal preferences. Plus, the wing is designed for optional flap configuration, and separately purchased fiberglass floats can be added for fun touch-and-go water landings at the lake.
Time and time again we hear that, "Nothing flies like a stick".

Special Features:
- Control surfaces: Ailerons, Elevator, Rudder and Flaps (Optional)
- Lightweight balsa/ply construction
- One piece wing with generous wing area
- Firewall set up for two different brushless motors
- Covered in exclusive UltraCote
- Strong landing gear mounts for smooth grass takeoffs and landings
- Aft float mount included for use with optional floats
- Wing can be configured with flaps (Extra servos required)
- Fully illustrated, step-by-step instruction manual

More Information (links):
* Building Instructions

Airfoil	:	Symmetrical
Wing area	:	480 sq.in.
Wing loading	:	15-16 oz/sq.ft.
Empty weight	:	38 oz. (1085g)

Video:
Ultra Stick 25e - 2.3MB

Flash Video:

Suggested Equipment:
(1) Hacker A30 10XL
(1) Spin 44 ESC
(1) TP2600 4S battery
(4) HS-225BB (6 w/flaps)
(1) TY 2" Red spinner
(1) APC-E 12x6 propeller
(1) Deans connector
(2) 12" Servo extension
(2) 3" Servo extension
(1) Servo Y-harness (w/flaps)
(1) Floats 25 Size