The T-Rex 600 Nitro Limited Edition combines proven performance with a fresh appearance package that will make you the envy of all at your flying field. Also included in addition to the standard 600 Pro are: upgraded metal tail blade holders, a full set of DS610 cyclic servos, the GP750/DS650 Head lock gyro/servo combo and a pair of T-Rex 600D main blades.

Align helicopters literally sets a new standard in both quality and price.

Special Features:

• Beautiful factory painted fiberglass canopy w/rigid clip for fast removal
• +/-14 degrees collective pitch is possible for extreme 3D performance
• Clutch, Fan and Bell assembly provide very smooth operation, even at high RPM
• Forward mounted tail servo helps to keep exhaust oil from entering the servo
• All servos moved forward for CG
• Battery tray designed for easy, clean radio gear installation
• Fuel Tank Capacity 440cc for about 10 minutes 3D flying
• Main Gear Ratio 8.5:1, 1500-2200 Rotor RPM
• Heavy duty tail with thrust bearings and 95mm Tail Blades
• Torque Tube driven tail for incredible 50 sized performance
• Rigid CF frames, fins and boom supports that can handle hard crashes without damage
• Super engine cooling system features large diameter fan and very efficient airflow
• Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any problems
• Mixture servo mount included for installing an engine temperature controller

Specifications:

• Length: 1160mm
• Height: 410mm
• Main blade length: 600mm
• Main rotor diameter: 1350mm
• Tail rotor: 240mm
• Engine pinion gear: 20T
• Main drive gear ratio: 8.5:1:4.5 (E:M:T)
• Autorotation tail drive gear: 180T
• Flying weight: 3200g

Included Accessories:
(1) T-Rex 600 Nitro LE Kit
(1) Painted Fiberglass Canopy
(1) T-Rex 600D 600mm CF Blades
(1) CF Paddle Set
(1) CF Tail Blades Set
(1) 2 in 1 Regulator w/Battery
(1) GP750/DS650 Head Lock Gyro Combo
(3) DS610 Servos
(1) RCE-G600 Governor

All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.

T-Rex 600 Nitro LE Setup Suggestions:

	3D	Extreme 3D
Swash Servos (3)	Stock	Futaba BLS253
Tail Servo	Stock	Futaba BLS254
Receiver	Spektrum AR7600	Spektrum AR7600
Engine	O.S. Hyper .55	O.S. Hyper .55
Gyro	Stock	Spartan DS760
Receiver Power	Stock	Rx TP2600 2S
Blades	Stock	Edge 603 Flybar

Suggested Equipment:
(3) Futaba BLS253 servo
(1) Futaba BLS254 servo
(1) Spartan DS760 gyro
(1) AR7600 receiver
(1) Rx TP2600 2S Battery
(1) Align DS620 (throttle)
(1) Edge 603 Flybar