The T-Rex 700 Nitro Limited Edition combines proven performance with a fresh appearance package that will make you the envy of all at your flying field. Also included in addition to the standard 700N combo are: upgraded metal tail blade holders, a full set of DS610 cyclic servos, the GP750/DS650 Head lock gyro/servo combo and a pair of T-Rex 690D main blades.

Align helicopters literally sets the new standard in both quality and price.

Special Features:

• Simple and light weight design provides awesome flight performance
• +/-13 degrees collective pitch is possible for extreme 3D performance
• Clutch, Fan and Bell assembly provide very smooth operation, even at high RPM
• Forward mounted tail servo helps balance and helps to keep exhaust oil from entering the servo
• All servos moved forward for CG
• Battery tray designed for easy, clean radio gear installation
• Fuel Tank Capacity 630cc for about 8-10 minutes 3D flying
• Main Gear Ratio 8.2:1, 1500-2200 Rotor RPM
• Heavy duty tail with thrust bearings
• Torque Tube driven tail for incredible 90 sized performance
• Rigid frames, fins and boom supports that can handle hard crashes, usually without as much damage
• Super engine cooling system features large diameter fan and very efficient airflow
• New main gear with one-way bearing design for high torque

Specifications:

• Length: 1335mm
• Height: 450mm
• Main blade length: 690-710mm
• Main rotor diameter: 1560-1600mm
• Tail rotor: 280mm
• Engine pinion gear: 20T
• Main drive gear ratio: 8.2:1:4.54 (E:M:T)
• Autorotation tail drive gear: 150T
• Tail drive gear: 33T
• Flying weight: 4200g

Included Accessories:
(1) T-Rex 700 Nitro LE Kit
(1) Painted Fiberglass Canopy
(1) T-Rex 690D CF Main Blade Set
(1) CF Paddle Set
(1) CF Tail Blades Set
(1) 2 in 1 Regulator w/Battery
(1) GP750/DS650 Head Lock Gyro Combo
(3) DS610 Servos
(1) RCE-G600 Governor

All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.

T-Rex 700 Nitro LE Setup Suggestions:

	3D	Extreme 3D
Swash Servos (3)	Stock	JR DS8717
Tail Servo	Stock	JR DS8900G
Receiver	Spektrum AR7600	Spektrum AR7100R
Engine	O.S. Hyper .91	YS 91SR Heli
Gyro	Stock	Spartan DS760
Receiver Power	Stock	Rx TP2600 2S
Blades	Stock	Radix SB710mm

Suggested Equipment:
(3) JR DS8717 servo
(1) JR DS8900G servo
(1) AR7100R receiver
(1) Spartan DS760 gyro
(1) YS 91SR engine
(1) Align DS620 servo (throttle)
(1) Hatori YS91SR Pipe
(1) Rx TP2600 2S Battery
(1) Radix SB710mm