BEC VR5203 Manufacturer Spektrum Type Switching Regulator Max Input Voltage 10V Min Input Voltage 5.5V Output Voltage 5.2V Output Current 2A Continues/3A Peak Dimensions 32mm x 23mm x 12mm Weight 7g Max #Servos 3 Analog, 2 Digital Connector Universal JR/Hitec/Futaba Applications Airplanes/Helicopters

The VR5203 provides regulated voltage protection for up to two servo functions with two input ports and two output ports. This unique component eliminates the danger of higher voltage power systems to standard voltage servos by being placed in between the receiver and the servo needing regulation. This allows the rest of the system to work at a desired voltage.

Spektrum's Dual Output Step Down Regulator is primarily designed for use with gyros in helicopters. Most brands of gyros/ tail rotor servos have voltage limits of 6V or less. The Dual Output Regulator installs between the receiver and the gyro in the rudder and gain channels and regulates the voltage to the gyro and tail rotor servo to a constant 5.2 volts. This allows the rest of the system to operate using higher voltage, typically 6V NiMH or even 2S 7.4V Li-poly battery pack, providing increased servo performance and response.

Not intended to be installed between the battery and the receiver, install between receiver and servo needing regulation.

Features:
- Two inputs provides the ability to run applications at lower voltages
- Two outputs distributes the load over two connectors to minimize drops in high current draw applications
- Voltage input: 5.5 - 10 Volts
- Continues current: 2A (3A Peak)

For best results, ensure that the all BECs are installed at least 2" (50mm) away from your receiver and antenna.