T-Rex 700 Nitro Pro Combo

Advanced Search

Your Cart Is Empty

T-Rex 700 Nitro Pro Combo	ALIKX018001A

Price

Stock Y/N

Qty

  Choose your version:

$711.00

Description

Customer Reviews

Email this to a friend

Back In-Stock Notification


Rotor Diameter: 61.42" (1560mm)	Tail Rotor: 11" (280mm)	Weight: 9.25 lbs. (4200g)	5-6 channels	Engine: .91 Glow

Align offers the most complete high-performance, high-quality helicopters in the industry. The T-REX 700 boasts a .90-size airframe, but with a performance level far beyond the equivalent size of glow helicopter. Align helicopters literally sets a new standard in both quality and price. The Trex 700 continued the quality standard which was first established with its smallest brother, the T-Rex 450. The T-Rex 700 gives pilots enormous control in both precision flying as well as 3D maneuverability. The NEW Trex 700 Nitro Pro has proven to be the HOTTEST 700 size helicopter on the market and with our recommended set up, it delivers great products for a low price.

Align helicopters literally sets the new standard in both quality and price.

Electric Conversion
* (Chief Heli Bum) Danny Melnik's T-Rex Align T-Rex 700 Electric!!!
* Click Here for T-Rex 700 Electro Pro Conversion Kit

Special Features:

Simple and light weight design provides awesome flight performance
+/-13 degrees collective pitch is possible for extreme 3D performance
Clutch, Fan and Bell assembly provide very smooth operation, even at high RPM
Forward mounted tail servo helps balance and helps to keep exhaust oil from entering the servo
All servos moved forward for CG
Battery tray designed for easy, clean radio gear installation
Fuel Tank Capacity 630cc for about 8-10 minutes 3D flying
Main Gear Ratio 8.2:1, 1500-2200 Rotor RPM
Heavy duty tail with thrust bearings
Torque Tube driven tail for incredible 90 sized performance
Rigid frames, fins and boom supports that can handle hard crashes, usually without as much damage
Super engine cooling system features large diameter fan and very efficient airflow
New main gear with one-way bearing design for high torque

Specifications:

Length: 1335mm
Height: 450mm
Main blade length: 690-710mm
Main rotor diameter: 1560-1600mm
Tail rotor: 280mm
Engine pinion gear: 20T
Main drive gear ratio: 8.2:1:4.54 (E:M:T)
Autorotation tail drive gear: 150T
Tail drive gear: 33T
Flying weight: 4200g

Included Accessories:
(1) T-Rex 700 Nitro Kit
(1) Painted Fiberglass Canopy
(1) CF Paddle Set
(1) CF Tail Blades Set
(1) RCE-G600 Governor
(1) Fuel Tube w/Fuel Filter
(1) Frame Brace
(1) Switch Mount
(1) Mixture Servo Mount
(1) Repair Towel

More information (links):
* Building Instructions

All of our recommended power setups are designed to best of our knowledge. We have successfully flown all of them. But as with everything else in the R/C helicopter world, all of these can and will eventually be changed and improved. Please carefully consider everything before making any changes to our recommendations. Even slight adjustments: (a new gyro or different type of main blades) WILL effect final result. Remember: If you need us, we are always only phone call or email away.

T-Rex 700 Nitro Pro Setup Suggestions:

	Stock	3D
Swash Servos (3)	Futaba S9452	JR DS8717
Tail Servo	Futaba S9254	JR DS8900G
Receiver	Spektrum AR7000	Spektrum AR7100R
Engine	O.S. Hyper .91	YS 91SR Heli
Gyro	Futaba GY401	Spartan DS760
Receiver Power	Rx FP3000 2S	Rx FP3000 2S
Blades	Radix 690mm	Radix SB710mm

Suggested Equipment:
(3) JR DS8717 servo
(1) JR DS8900G servo
(1) AR7100R receiver
(1) Spartan DS760 gyro
(1) YS 91SR engine
(1) Hitec HS-65MG servo (throttle)
(1) G-Force micro servo adapter
(1) Hatori YS91SR Pipe
(1) EVO Rx FP3000 2S battery
(1) Radix SB710mm

Related Products: