LR-1A Pogo Pylon Racer 15e (ARF)

There is some special connection between race planes and model airplane builders. Goodyear racers were started in the 1950s, and many designers came up with airplanes that modelers loved to make into great-flying sport scale models. The LR-1A Pogo is a hot new model from E-Flite that captures the look and excitement of these airplanes. Electric power and ARF construction make it easy to complete and get to the flying field in short order. There is more than one way to set up this airplane, whether your interest is sport aerobatics of the large kind or racing around the pylon course. The motor, ESC and Li-Poly battery combination can be selected to provide the kind of performance you want, and this airplane is designed to handle it. The airplane was designed by well-known RC pylon racer Jerry Small. The final result is an airplane we think you are going to have a great time with at the field or at the race course. Designed by Jerry Small to give intermediate to experienced modelers a sport plane that can also be flown as a pylon racer, the LR-1A Pogo 15e will accept a variety of power setups. Equipped with Power 15 brushless motor, 40A ESC and a 3S Li-Po pack, the Pogo has plenty of performance for sport aerobatics. If or when you want to set it up for pylon racing, the potent combination of E-Flite's new Power 25-1250Kv brushless motor and a high-C 4S Li-Poly battery pack can have you turning laps at speeds in excess of 110 mph!

Whichever setup you choose, sportster or speedster, you can be sure of one thing - the LR-1A Pogo 15e is one hot little number that will leave you grinning from ear to ear, however you fly it. With our recommended Hacker A30 8XL, 9x9 prop and 3300mAh 4S you can expect to achieve speeds over 100-110 mph (165-180 km/h).

Special Features:
- Control surfaces: Ailerons, Elevator and Rudder
- Step-by-Step instruction manual
- Pre-painted fiberglass cowl and wheel pants
- NMPRA-legal for pylon racing competition
- Step-by-Step instruction manual
- Removable hatch/canopy for easy access
- Removable bolt-on wing and tail parts
- Ultracote covered wings and tail parts
- Requires just three mini servos

More information (links):
* Building Instructions
* Tape Hinges Installation