Newsletter
Jeti USA
Jeti back
jeti logo
Transmitters
Receivers
Telemetry
Accessories
Axi Motors
axi back
axi logo
V2 Brushless
Sailplane
Cyclone
Accessories
Axi Motors
secraft back
secraft logo
Tx/Rx Accessories
Securing Systems
Fuel Systems
Hardware
TopmodelCZ
topmodel back
topmodel back
TD/E-Sailplanes
Scale Sailplanes
E-Hotliners
Pylon Racers
Opale
opale back
opale logo
Paragliders
Paramotors
Wings & Pilots

Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)


Price: $50.00
In Stock: 26
Part: ESELITE-SE4
Back In Stock Notification
Made In Czech Republic
Jeti Care Services
Jeti Care Services
Jeti Fight Club
Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)

Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)
The Servo Channel Expander SE4 is a device that converts serial bus signal to standard PWM servo outputs. It offers up to four configurable servo outputs with optional period and fail-safe setting.

The SE4 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE4 to the receiver serial line and freely assign its own output channels.

Specifications and Features
- Supported Protocols: Jeti EX, Multiplex M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2
- Small dimensions and high current throughput via the integrated MR30 power connector.
- Automatic detection of serial data/telemetry after startup.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interface.

Easy installation, Attach the required servos to the SE4 servo expander. Connect the receiver using its output port with serial data option. The SE4 uses the MR30 connector for primary data input.Turn on the transmitter and apply the appropriate power source to the receiver. The status LED starts blinking as soon as the SE4 detects signal on the serial line.

Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)

More information (links):
* Instruction Manual (pdf.)
* Click Here for Firmware Updates

Continues/Peak Current: 15A/60A (2 Seconds)
Operational Current: 15mA
Operational Voltage: 4-14V (Recommended 5-8.4V)
Dimensions: 34mm x 14mm x 8mm
Weight: 14g



Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)
Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)
Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)

Elite SE4 Servo Channel Expander Serial Bus to PWM (Jeti EX, Graupner HoTT, Futaba S.Bus2)
 

Related Products:

Jeti Telemetry & Spin/Mezon ESC JetiBox Monitor/Programmer
Price: $39.00    In Stock: 49
ratingratingratingratingrating
Jeti Telemetry & Spin/Mezon ESC JetiBox Monitor/Programmer
MR30-M Connector Flat 2mm/20A 3-Pole w/Cover (2 Pair)
Price: $3.00    In Stock: 13
MR30-M Connector Flat 2mm/20A 3-Pole w/Cover (2 Pair)

Product Reviews:

(0 Ratings, 0 Reviews)