The new Central Box 210 is an improvement over the venerable Central Box 200. We have removed the overload
protection at each servo output and designed an aluminum housing for those high power demand applications. The
Central Box
210 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs
(2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power & RF Signal Redundancy.
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as easy
way to wirelessly configure the Servo Outputs, Ditex Servo & EX Telemetry, Fail-Safe Setting or Function
Assignment.
Included:
(1) Jeti Central Box 210
(2) Jeti Duplex EX R3/RSW 2.4GHz Receiver
(1) Magnetic Switch
(1) Magnetic Key
Power Supply
The power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries
to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the
voltage is
the same, the power can be used from both batteries at the same time. When the voltage of the batteries is
different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of
different
capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one
battery, it can be connected via battery (BATT 1) Input.
Magnetic Switch (Included)
The magnetic switch is used to turn the Central Box ON/OFF and is connected to a separate slot labeled "SW". To
turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the
target so
that the key and the target on the magnetic switch are properly oriented.
Wireless Switch R3/RSW (Optional)
State-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless
power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON/OFF
with
simple flipping of the switch wirelessly from the Jeti DC/DS transmitters.
Central Box 200 installations done by Jeti USA Team pilot Joe Smith & our friend C.Brent.
Features:
- Control Management with Configurable Servo Output
- Power Distribution with Two Independent Inputs
- Heavy Duty Aluminum Case for Extra Cooling and Protection
- Firmware Updatable via Jeti USB Adapter and Jeti Studio
- Wirelessly Programmable Using DC/DS Tx Device Explorer
- Independent Receiver Signal Inputs (R1, R2, E1/R3)
- Up to 15x Standard PWM and Ditex Telemetry Servo Outputs
- Up to 3x Telemetry Sensors Inputs (E1/R3, E2/15, E3/14)
- Input for Included Magnetic or Optional Wireless Switch
- Input Voltage: 4V - 8.4V
- Output Current: 20A Continues/90A Peak
- Dimensions/Weight: 65mm x 42mm x 18mm/59g
More information (links):
* Instruction Manual
(.pdf)
* Click Here for Firmware Updates
|
Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no
signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe
function, you can also select
how the Central Box responds at signal loss for each of the individual outputs.
|
|
Servo Mapping
Servo No. - Assigning outputs of the transmitter to the Central Box outputs.
Group - Assigning specific output to the group of output impulses that will be generated
from the receiver in the same time.
|
|
Ditex Servo Telemetry
The Ditex telemetry servos offer groundbreaking design features combined with incredible
reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing
real-time information including
complete telemetry data (Torque, Min/Max Current, Voltage, Angle, Telemetry Alarms) and full
system integration.
|
|
Duplex Telemetry
Temperature - Temperature of the Central Box
Voltage - Voltage (V) of Individual Outputs of the Central Box
Current - Current (A) Drawn from the Battery
Capacity - Capacity (mAh) Taken from the Batteries
|
After receiving numerous questions regarding getting extra channels while using Jeti Central Box 210/220 we have
come up with elegant configuration that uses power from CB210/220 servo port 9/10 for Central Box 100. This way
you can
have up to 20 high power servos connected to the system and still have full battery telemetry & redundancy.
If you connect Telemetry to the CB100 and use CB100 only for noncritical functions (Gyro, Lights, Airbrakes) you
can get away with a single power lead and go up to 22 servos.