Newsletter
Elite
Elite back
Elite logo
Power Redundancy
Stabilization Systems
Telemetry
Jeti USA
Jeti back
jeti logo
Transmitters
Receivers
Telemetry
Axi Motors
axi back
axi logo
V2 Brushless
Sailplane
CycloneAccessories
Axi Motors
secraft back
secraft logo
Tx/Rx Accessories
Securing Systems
Fuel Systems
TopmodelCZ
topmodel back
topmodel back
TD/E-Sailplanes
Scale Sailplanes
E-Hotliners
Opale
opale back
opale logo
Paragliders
Paramotors
Wings & Pilots

Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)


Price: $395.00
In Stock: 5
Part: JETIBOX220R3-3
Back In Stock Notification
Made In Czech Republic
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)

The Central Box 220 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box 220 has a unique design that provides overload protection for up to 11 Standard (up to 415 oz/in, 30 kg/cm) and 4 Ultra Torque (up to 830 oz/in, 60 kg/cm) servos. The Central Box 220 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power & RF Signal Redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo & EX Telemetry, Fail-Safe Setting or Function Assignment.

Included:
(1) Jeti Central Box 220
(3) Jeti Duplex EX R3/RSW 2.4GHz Receiver

Power Supply
The power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.

Magnetic Switch (Optional)
The magnetic switch is used to turn the Central Box ON/OFF and is connected to a separate slot labeled "SW". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.

Wireless Switch R3/RSW (Included)
State-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON/OFF with simple flipping of the switch wirelessly from the Jeti DC/DS transmitters.

Central Box 200 installations done by Jeti USA Team pilot Joe Smith & our friend C.Brent.

Jeti Central Box 220 Power Distribution Unit with Magnetic SwitchJeti Central Box 220 Power Distribution Unit with Magnetic SwitchJeti Central Box 220 Power Distribution Unit with Magnetic Switch

Features:
- Control Management with Configurable Servo Output
- Power Distribution with Two Power Independent Inputs
- Servo Overload Protection for All Output Channels (11x Standard, 4x HD)
- Heavy Duty Aluminum Case for Extra Cooling and Protection
- Firmware Updatable via Jeti USB Adapter and Jeti Studio
- Wirelessly Programmable Using DC/DS Tx Device Explorer
- Independent Receiver Signal Inputs (R1, R2, E1/R3)
- Up to 15x Standard PWM and Ditex Telemetry Servo Outputs
- Up to 3x Telemetry Sensors Inputs (E1/R3, E2/15, E3/14)
- Input for Included Magnetic or Optional Wireless Switch
- Input Voltage: 4V - 8.4V
- Output Current: 20A Continues/90A Peak
- Dimensions/Weight: 65mm x 42mm x 18mm/64g

More information (links):
* Instruction Manual (.pdf)
* Click Here for Firmware Updates





Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)

Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)

Servo Mapping
Servo No. - Assigning outputs of the transmitter to the Central Box outputs.
Group - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)

Ditex Servo Telemetry
The Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)

Duplex Telemetry
Temperature - Temperature of the Central Box
Shorted Outputs No. - Number of Overloaded Outputs
Voltage - Voltage (V) of Individual Outputs of the Central Box
Current - Current (A) Drawn from the Battery
Capacity - Capacity (mAh) Taken from the Batteries
Jeti Central Box 220 Power Distribution Combo with R3/RSW Receivers (3)


After receiving numerous questions regarding getting extra channels while using Jeti Central Box 210/220 we have come up with elegant configuration that uses power from CB210/220 servo port 9/10 for Central Box 100. This way you can have up to 20 high power servos connected to the system and still have full battery telemetry & redundancy.

If you connect Telemetry to the CB100 and use CB100 only for noncritical functions (Gyro, Lights, Airbrakes) you can get away with a single power lead and go up to 22 servos.

Jeti Central Box 220 Power Distribution Combo w/Magnetic Switch & R3/RSW Receivers (2)

Jeti Central Box 220 Power Distribution Combo w/Magnetic Switch & R3/RSW Receivers (2)
 

Related Products:

Multiplex Connectors (10 Pair)
Price: $28.00    In Stock: 4
Multiplex Connectors (10 Pair)
Multiplex Connectors (5 Pair)
Price: $15.00    In Stock: 9
ratingratingratingratingrating
Multiplex Connectors (5 Pair)
Multiplex Power Extension Harness 11" (280mm)
Price: $16.00    In Stock: 21
Multiplex Power Extension Harness 11" (280mm)
Multiplex Power Extension Harness 18" (460mm)
Price: $18.00    In Stock: 16
Multiplex Power Extension Harness 18" (460mm)
Multiplex Power Extension Harness 6" (150mm)
Price: $14.00    In Stock: 18
Multiplex Power Extension Harness 6" (150mm)
Jeti Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry
Price: $85.00    In Stock: 20
Jeti Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry

Product Reviews:

(0 Ratings, 0 Reviews)