Wingspan:117.75" (2990mm)
Length:60" (1515mm)
Weight:67-70 oz. (1895-1980g)
Channels: 4,6
Good: AXi 2826/10, 13x10 folding
Better: Hacker B40 8L w/6.7:1, 15x10 folding
4000 3S/4S
40mm spinner
The Pulsar Twin 3E Pro is the latest addition to the ever-growing Pulsar family of hand-made electric sailplanes. Built at our request, this model is designed to hold an additional payload if needed and still give you Pulsar performance. The Pulsar Twin 3E Pro model uses the same AG25 modified airfoil designed by Dr. Mark Drela as the other 3m and larger Pulsars. Just like its smaller cousins, the entire model is constructed using free-flight techniques. The wing is a balsa built-up Carbon Fiber and Kevlar D-box design that utilizes carbon fiber faced balsa ribs and carbon fiber trailing edge. The open section of the wing, as well as the tail parts, are covered with UltraCote. The fuselage is made of gel-coated 2.4GHz friendly fiberglass/Kevlar with a carbon fiber tapered boom and removable fiberglass nosecone. The three piece wing and double boom conventional tail are each easily removable for transport and storage. The servos for the rudders and elevator servos install in the vertical fins. The careful use of composites, combined with an underlying wood structure in the wing, ensures a good light structure that will hold its shape for a long time. This is an extremely light, high performance model.
Virtually perfect, very well made and extremely clean. One of the most advanced addition to the ever-growing Pulsar family of hand-made electric sailplanes.
Special Features:- Control Surfaces: Ailerons, Elevator, Twin Rudders and Flaps
-
Kevlar/Fiberglass 2.4GHz FPV friendly pod with removable nose cone- Tight covering, with all seams hand-sealed
- high volume, gel-coated Fiberglass/Kevlar pod with CF tapered boom
- Highly efficient pylon mounted wing
- Ready-built Balsa/CF/Kevlar D-tube 3-piece PLUG-IN wing design
- Transparent Ultracote covered wings and tail parts
- Includes hardware
- Virtually perfect, extremely clean and well made
More Information (links): * Building Pictures and Details Airfoil
Wing area
Wing loading
Empty weight
: AG 25 mod.
: 1070 sq.in. (69 sg.dm)
: 9-9.5 oz/sq.ft. (27.5-29 g/sg.dm)
: 38 oz. (1080g)
Suggested Equipment (Sport 3S)(1) AXi 2826/10
(1) Jeti Spin Pro 66 ESC
(1) 4000 3S battery
(1) D85MG servo (flaps)
(2) HS-5065MG servo (ailerons)
(4) KST HS08-A servo (elevator, rudders)
(1) Servo frame Hitec HS-85BB/85MG/5085MG, D85MG
(2) Servo frame Hitec HS-65HB/65MG/5065MG
(1) Aeronaut turbo 40/5/8mm folding spinner
(1) Aeronaut yoke 42/8mm
(1) Aeronaut blade stopper
(1) Aeronaut 13x10 folding propeller
(1) Battery connector
(4) 36" Servo extension
(2) 24" Servo extension
(4) 12" Servo extension
(7) 6" Servo extension
Suggested Equipment (Power 4S): (1) Hacker B40 8L w/6.7:1
(1) Jeti Spin Pro 80 ESC
(1) 4000 4S battery
(3) KST X10-Mini servo (ailerons, flaps)
(4) KST HS08-A servo (elevator, rudders)
(3) Servo frame KST X10-Mini
(1) Aeronaut turbo 40/6/8mm folding spinner
(1) Aeronaut yoke 42/8mm
(1) Aeronaut blade stopper
(1) Aeronaut 15x10 folding propeller