Still Pylon Racer (ARF) Orange

The Still is a great introduction to the world of pylon racers. While it is not quite as intimidating as some of the fully hollow molded racers, it is stable and easy for the intermediate pilot to handle. Using the recommended brushless setup, the Still launches with just a toss and immediately climbs up and away. The airplane is a fast model with plenty of power. Typical to Topmodel, this ARF is of superb quality. The fuselage is orange gel-coat fiberglass. One piece wing design is traditional foam core, balsa sheeted, fiberglass reinforced. The wing and stabilizer are covered in UltraCote with orange/white top and orange bottom to aid in orientation while flying. The hardware package is very complete as well as the instruction manual.




Special Features:
- Control surfaces: Ailerons and Elevator
- Sleek gel-coated fiberglass fuselage
- Foam core balsa sheeted wing and balsa/carbon stabilizer
- One-piece wing, easily removable for transportation
- Wing and stabilizer covered in UltraCote
- Full hardware package including fiberglass motor mount
- Fast and stable flight characteristics
- Easy to hand launch

More information (links):
* Building Instructions (.pdf)
* Building Pictures and Details
* Tape Hinges Installation