|
Home
Stinger Pylon Racer (ARF) Yellow
|
|
Wingspan: 37.5" (950mm) Length: 29.5" (750mm) Weight: 18-20 oz. (500-550g) Channels: 3,4 Good: AXi 2217/12, 5.5x5.5 Better: AXi 480/1380, 6x6 1800/2100 3S 30mm spinner The Stinger is a great introduction to the world of pylon racers. While it is not quite as intimidating as some of the fully hollow molded racers, it is stable and easy for the intermediate pilot to handle. Using the recommended brushless setup, the Stinger launches with just a toss and immediately climbs up and away. The Stinger is a fast plane with plenty of power. Typical to Topmodel, this ARF is of superb quality. The fuselage is fiberglass, finished in white gel coat. One piece wing is traditional rib construction that is fully sheeted with balsa. The wing and stabilizer are covered in UltraCote with yellow/white top and red bottom to aid in orientation while flying. The hardware package is very complete as well as the instruction manual. Special Features: - Control surfaces: Ailerons and Elevator - Sleek white gel-coated fiberglass fuselage - Wing and stabilizer covered in UltraCote - Two separate ailerons servos - Full hardware package including fiberglass motor mount - Clear and complete instructions - Fast and stable flight characteristics - Easy to hand launch More information (links):* Building Pictures and Details* Tape Hinges Installation Airfoil Wing area Wing loading Empty weight
: S7012 mod. : 210 sq.in. : 13 oz/sq.ft. : 9 oz. (255g)
Suggested Equipment (Sport):
(1) AXi 2217/12
(1) Jeti Spin Pro 22 ESC
(1) 1800 3S battery
(3) HS-65HB servo (elevator, ailerons)
(3) Servo frame Hitec HS-65HB/65MG/5065MG
(1) MPJ 30/3.2mm e-spinner
(1) Graupner CAM 5.5x5.5 propeller
(1) Battery connector
(1) 6" Servo extension
Suggested Equipment (Power):
(1) AXi Cyclone 480/1380
(1) Jeti Spin Pro 33 ESC
(1) 2100 3S battery
(3) HS-5065MG servo (elevator, ailerons)
(3) Servo frame Hitec HS-65HB/65MG/5065MG
(1) MPJ 30/4mm e-spinner
(1) Graupner CAM 6x6 propeller
|
|
|
Price:
$75.00
In Stock: 7
|
|
|
Price:
$109.00
In Stock: 7
|
|
|
Price:
From $5.00 to $7.00
|
|
|
Price:
$37.00
Coming Soon
|
|
|
Price:
$25.00
In Stock: 10
|
|
|
Price:
From $16.00 to $25.00
|
|
|
Price:
From $27.00 to $35.00
|
|
|
Price:
$65.00
In Stock: 46
|
|
|
Price:
$75.00
In Stock: 12
|
|
|
Price:
From $12.00 to $14.00
|
|
|
Price:
From $4.00 to $7.00
|
|
|
Price:
$10.00
In Stock: 14
|
|
|
Price:
$4.00
In Stock: 70
|
|
Product Reviews:
(2 Ratings, 1 Review) |
Average Rating:
|
Great assembly and GREAT FUN!
Jason Longton
(Attleboro, MA)
9/1/2014 3:44 PM
I just maidened my Stinger today and all I can say is WOW!
The assembly took about four days and was a lot of fun, and everything went together really well. The hardest part was gluing on the tail. I suspect that I didn't do a perfect job on that part, but it doesn't seem to matter very much.
The first flight required some trim, but once she was all dialed in, she really put a smile on my face. Rolls are fast and axial, but the speed! Let me tell you, she covers ground. I'm only using a 30 amp speed control and I never opened her up all the way, but man did she haul!
If you are looking for a gorgeous and fast plane to really tear up the sky, this is it! Great plane, great fun.
|
|
|